Re: [Sip] Dual registration without Outbound

[jh at tutpro.com (Juha Heinanen)]

Christer Holmberg writes:

 > So, you want to register both contacts to both registars, right?
 > 
 > Example:
 > 
 > UA_Contact_wlan ----- OB_1 ----- REG_1
 > UA_Contact_wlan ----- OB_1 ----- REG_2
 > UA_Contact_3g   ----- OB_2 ----- REG_1
 > UA_Contact_3g   ----- OB_2 ----- REG_2

no, like this:

 > UA_Contact_wlan ----- OB_1 ----- REG_1
 > UA_Contact_wlan ----- OB_2 ----- REG_2
 > UA_Contact_3g   ----- OB_1 ----- REG_1
 > UA_Contact_3g   ----- OB_2 ----- REG_2

if outbound does not mandate that UA must register each contact with
both ob proxies, my pleasant surprise was a too early one and ob draft
falls back to the useless bin.

-- juha
_______________________________________________
Sip mailing list  https://www.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use sip-implementors at cs.columbia.edu for questions on current sip
Use sipping at ietf.org for new developments on the application of sip