[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PWE3] IANA last call

Shahram,

These are from AVT, and Jerry's draft : http://ietf.org/internet-drafts/draft-ash-avt-hc-over-mpls-protocol-00.txt
Please keep in mind that the authors of the iana drafts are not policers of the allocation , we are just playing the iana role for now.
So you you have any comments , please send them to the list.

Thanks.
Luca



Shahram Davari wrote:

Hi Luca,

Where are the following modes defined?

0x0008  SONET/SDH Circuit Emulation Service Over MPLS(CEM) [Note1]
0x001C  cTCP (RFC1144) Transport Header-compressed Packets
0x001D  IPHC (RFC2507) Transport Header-compressed Packets
0x001E  cRTP (RFC2508) Transport Header-compressed Packets
0x001F  ROHC (RFC3095) Transport Header-compressed Packets
0x0020  eCRTP (RFC3545) Transport Header-compressed Packets

Is it possible to add a reference to all items? 

Thanks,
-Shahram



-----Original Message-----
From: pwe3-bounces at ietf.org [mailto:pwe3-bounces at ietf.org]On Behalf Of
Luca Martini
Sent: Friday, June 10, 2005 1:15 PM
To: Yaakov Stein
Cc: pwe3; Stewart Bryant
Subject: Re: [PWE3] IANA last call


Yaakov,

any particular preference ?

I have allocated as follows:

 PW type Description

  0x0001  Frame Relay DLCI ( Martini Mode )
  0x0002  ATM AAL5 SDU VCC transport
  0x0003  ATM transparent cell transport
  0x0004  Ethernet Tagged Mode
  0x0005  Ethernet
  0x0006  HDLC
  0x0007  PPP
  0x0008  SONET/SDH Circuit Emulation Service Over MPLS(CEM) [Note1]
  0x0009  ATM n-to-one VCC cell transport
  0x000A  ATM n-to-one VPC cell transport
  0x000B  IP Layer2 Transport
  0x000C  ATM one-to-one VCC Cell Mode
  0x000D  ATM one-to-one VPC Cell Mode
  0x000E  ATM AAL5 PDU VCC transport
  0x000F  Frame-Relay Port mode
  0x0010  SONET/SDH Circuit Emulation over Packet (CEP)
  0x0011  Structure-agnostic E1 over Packet (SAToP)
  0x0012  Structure-agnostic T1 (DS1) over Packet (SAToP)
  0x0013  Structure-agnostic E3 over Packet (SAToP)
  0x0014  Structure-agnostic T3 (DS3) over Packet (SAToP)
  0x0015  CESoPSN basic mode
  0x0016  TDMoIP AAL1 Mode Structured
  0x0017  CESoPSN TDM with CAS
  0x0018  TDMoIP AAL1 Mode Structured with CAS
  0x0019  Frame Relay DLCI
  0x001A  TDMoIP AAL1 Mode Unstructured
  0x001B  TDMoIP AAL2 Mode
  0x001C  cTCP (RFC1144) Transport Header-compressed Packets
  0x001D  IPHC (RFC2507) Transport Header-compressed Packets
  0x001E  cRTP (RFC2508) Transport Header-compressed Packets
  0x001F  ROHC (RFC3095) Transport Header-compressed Packets
  0x0020  eCRTP (RFC3545) Transport Header-compressed Packets


I would like to send out the post-LC version today or tomorrow.
Let me know id this is fine.

Luca


Yaakov Stein wrote:







This is the start of Last Call for
IANA Allocations for pseudo Wire Edge to Edge Emulation (PWE3)






http://www.ietf.org/internet-drafts/draft-ietf-pwe3-iana-allo


cation-09.t


xt

Once again, there is a problem with the PW types for TDMoIP.

Right now there are
   0x0016  TDMoIP basic mode
   0x0018  TDMoIP TDM with CAS
which were probably allocated in analogy to the CESoPSN case.

However, there is no "basic" mode for TDMoIP,
and now that I have dropped the FORMID field
(in order to use 0000 in the first CW nibble for all cases)
I need the differentiation between the 4 modes described
in the TDMoIP draft.

These modes are:

 AAL1 mode - unstructured
 AAL1 mode - structured
 AAL1 mode - structured with CAS
 AAL2 mode

The final mode (used for sending SS7 or ISDN PRI signaling)
will use 0x0006 allocated for HDLC.

So please allocate 4 PW types as described above.

Y(J)S






_______________________________________________
pwe3 mailing list
pwe3 at ietf.org
https://www1.ietf.org/mailman/listinfo/pwe3



_______________________________________________
pwe3 mailing list
pwe3 at ietf.org
https://www1.ietf.org/mailman/listinfo/pwe3