Re: [PWE3] IANA last call

[Luca Martini <lmartini at cisco.com>]

Shahram Davari wrote:

> Thanks. What about Nortel's SONET mode?
>
>  
???
The ITU requests are handled by PWE3 chairs/ADs.
I have not heard of this mode, is there a draft maybe ?
Luca

> -Shahram
>
>  
>
> > -----Original Message-----
> > From: Luca Martini [mailto:lmartini at cisco.com]
> > Sent: Friday, June 10, 2005 3:35 PM
> > To: Shahram Davari
> > Cc: Yaakov Stein; pwe3; Stewart Bryant
> > Subject: Re: [PWE3] IANA last call
> >
> >
> > Shahram,
> >
> > These are from AVT, and Jerry's draft : 
> > http://ietf.org/internet-drafts/draft-ash-avt-hc-over-mpls-pro
> > tocol-00.txt
> > Please keep in mind that the authors of the iana drafts are 
> > not policers 
> > of the allocation , we are just playing the iana role for now.
> > So you you have any comments , please send them to the list.
> >
> > Thanks.
> > Luca
> >
> >
> >
> > Shahram Davari wrote:
> >
> >    
> >
> > > Hi Luca,
> > >
> > > Where are the following modes defined?
> > >
> > > 0x0008  SONET/SDH Circuit Emulation Service Over MPLS(CEM) [Note1]
> > > 0x001C  cTCP (RFC1144) Transport Header-compressed Packets
> > > 0x001D  IPHC (RFC2507) Transport Header-compressed Packets
> > > 0x001E  cRTP (RFC2508) Transport Header-compressed Packets
> > > 0x001F  ROHC (RFC3095) Transport Header-compressed Packets
> > > 0x0020  eCRTP (RFC3545) Transport Header-compressed Packets
> > >
> > > Is it possible to add a reference to all items? 
> > >
> > > Thanks,
> > > -Shahram
> > >
> > >
> > >
> > >      
> > >
> > > > -----Original Message-----
> > > > From: pwe3-bounces at ietf.org 
> > > >        
> > [mailto:pwe3-bounces at ietf.org]On Behalf Of
> >    
> >
> > > > Luca Martini
> > > > Sent: Friday, June 10, 2005 1:15 PM
> > > > To: Yaakov Stein
> > > > Cc: pwe3; Stewart Bryant
> > > > Subject: Re: [PWE3] IANA last call
> > > >
> > > >
> > > > Yaakov,
> > > >
> > > > any particular preference ?
> > > >
> > > > I have allocated as follows:
> > > >
> > > > PW type Description
> > > >
> > > >  0x0001  Frame Relay DLCI ( Martini Mode )
> > > >  0x0002  ATM AAL5 SDU VCC transport
> > > >  0x0003  ATM transparent cell transport
> > > >  0x0004  Ethernet Tagged Mode
> > > >  0x0005  Ethernet
> > > >  0x0006  HDLC
> > > >  0x0007  PPP
> > > >  0x0008  SONET/SDH Circuit Emulation Service Over 
> > > >        
> > MPLS(CEM) [Note1]
> >    
> >
> > > >  0x0009  ATM n-to-one VCC cell transport
> > > >  0x000A  ATM n-to-one VPC cell transport
> > > >  0x000B  IP Layer2 Transport
> > > >  0x000C  ATM one-to-one VCC Cell Mode
> > > >  0x000D  ATM one-to-one VPC Cell Mode
> > > >  0x000E  ATM AAL5 PDU VCC transport
> > > >  0x000F  Frame-Relay Port mode
> > > >  0x0010  SONET/SDH Circuit Emulation over Packet (CEP)
> > > >  0x0011  Structure-agnostic E1 over Packet (SAToP)
> > > >  0x0012  Structure-agnostic T1 (DS1) over Packet (SAToP)
> > > >  0x0013  Structure-agnostic E3 over Packet (SAToP)
> > > >  0x0014  Structure-agnostic T3 (DS3) over Packet (SAToP)
> > > >  0x0015  CESoPSN basic mode
> > > >  0x0016  TDMoIP AAL1 Mode Structured
> > > >  0x0017  CESoPSN TDM with CAS
> > > >  0x0018  TDMoIP AAL1 Mode Structured with CAS
> > > >  0x0019  Frame Relay DLCI
> > > >  0x001A  TDMoIP AAL1 Mode Unstructured
> > > >  0x001B  TDMoIP AAL2 Mode
> > > >  0x001C  cTCP (RFC1144) Transport Header-compressed Packets
> > > >  0x001D  IPHC (RFC2507) Transport Header-compressed Packets
> > > >  0x001E  cRTP (RFC2508) Transport Header-compressed Packets
> > > >  0x001F  ROHC (RFC3095) Transport Header-compressed Packets
> > > >  0x0020  eCRTP (RFC3545) Transport Header-compressed Packets
> > > >
> > > >
> > > > I would like to send out the post-LC version today or tomorrow.
> > > > Let me know id this is fine.
> > > >
> > > > Luca
> > > >
> > > >
> > > > Yaakov Stein wrote:
> > > >
> > > >   
> > > >
> > > >        
> > > >
> > > > >     
> > > > >
> > > > >          
> > > > >
> > > > > > This is the start of Last Call for
> > > > > > IANA Allocations for pseudo Wire Edge to Edge Emulation (PWE3)
> > > > > >
> > > > > >
> > > > > >  
> > > > > >
> > > > > >       
> > > > > >
> > > > > >            
> > > > > http://www.ietf.org/internet-drafts/draft-ietf-pwe3-iana-allo
> > > > >     
> > > > >
> > > > >          
> > > cation-09.t
> > >
> > >
> > >      
> > >
> > > > xt
> > > >
> > > > Once again, there is a problem with the PW types for TDMoIP.
> > > >
> > > > Right now there are
> > > >   0x0016  TDMoIP basic mode
> > > >   0x0018  TDMoIP TDM with CAS
> > > > which were probably allocated in analogy to the CESoPSN case.
> > > >
> > > > However, there is no "basic" mode for TDMoIP,
> > > > and now that I have dropped the FORMID field
> > > > (in order to use 0000 in the first CW nibble for all cases)
> > > > I need the differentiation between the 4 modes described
> > > > in the TDMoIP draft.
> > > >
> > > > These modes are:
> > > >
> > > > AAL1 mode - unstructured
> > > > AAL1 mode - structured
> > > > AAL1 mode - structured with CAS
> > > > AAL2 mode
> > > >
> > > > The final mode (used for sending SS7 or ISDN PRI signaling)
> > > > will use 0x0006 allocated for HDLC.
> > > >
> > > > So please allocate 4 PW types as described above.
> > > >
> > > > Y(J)S
> > > >
> > > >
> > > >
> > > >   
> > > >
> > > >        
> > > _______________________________________________
> > > pwe3 mailing list
> > > pwe3 at ietf.org
> > > https://www1.ietf.org/mailman/listinfo/pwe3
> > >
> > >
> > >      

_______________________________________________
pwe3 mailing list
pwe3 at ietf.org
https://www1.ietf.org/mailman/listinfo/pwe3